User's Manual

Appendix A: Specifications
Page 18 InterReach Spectrum Remote Access Unit Installation Guide
© 2013 TE Connectivity Ltd TECP-77-222 Issue 2 • 300001759666 Rev B • December 2013
NominalPassbandBandwidthsandGains
FrequencyBandsSupported 850Cellular;800iDEN;900iDEN;1900PCS;2100AWS;
2600LTE;700UpperC/LowerABC
RF Frequency
TX RX
850 Cell
Bandwidth 869-894 824-849
Gain (dB) 40 30
800 SMR
Bandwidth 851-869 806-824
Gain (dB) 40 30
900 SMR
Bandwidth 935-940 896-901
Gain (dB) 40 30
1900 PCS
Bandwidth 1930-1995 1850-1915
Gain (dB) 40 30
2600 LTE
Bandwidth 2620-2690 2500-2570
Gain (dB) 40 30
700 Upper C
Bandwidth 746-756 776-786
Gain (dB) 40 30
700 Lower ABC
Bandwidth 728-746 698-716
Gain (dB) 40 30
Low/Medium Power
Level
700-900 MHz
Typical
Low/Medium Power
Level
1900-2600 MHz
Typical
High
Power Level
1900-2600 MHz
Typical
3
TX RX TX RX TX RX
Average gain with 180 m CATV 
at 25°C (77° F) (dB)
40
1
/43
2
30 40
1
/43
2
30 48 30
Ripple with 180 m CATV (dB) 2.5 3.0 3.5 4.0 3.5 4.0
Output IP3 (dBm) 38 38 43
Input IP3 (dBm) -8 -8 -8
Output 1 dB Compression Point (dBm) 26 26 31
Noise Figure 1 HU-1 EMG-8 RAUs (dB) 17 17 17
Noise Figure 1 HU-4 EMG-32 RAUs (dB) 23 23 23
1 Low Power is defined here as a Standard MRAU used with
Standard SRAUs; see Table 4 on page 19.
2 Medium Power is defined here as a High Power MRAU used
with Standard SRAUs; see Table 5 on page 20.
3 High Power is used to define a High Power MRAU used with
High Power SRAUs; see Table 6 on page 21.