User's Manual

7 / 0 7 • 1 0 5 1 0 5 A E
In-building Wireless Repeaters
In-building Wireless Repeaters
850 MHz Cellular and 1900 MHz PCS
3
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Typical Specifications
RF SPECIFICATION
Operating Frequency for the 1900 MHz
Down Link: 1930-1990 MHz
Up Link: 1850-1910 MHz
5MHz, 15MHz, or a combination of a 5 & 15MHz selectable
Operating Frequency for the 850 MHz
Down Link: 869-894 MHz
Up Link: 824-849 MHz
A, A’, A’’ OR B, B’ selectable
Output Power: +13dBm
Gain: 60dB
Flatness: +0dB, -4dB Full Band
Out of Band Gain: 45dB Offset 1MHz
35dB Offset 5MHz
NOISE FIGURE
Up Link: 5dB max
VSWR: 1.5 max
Frequency Stability: ±0.05ppM max
ALC: 20dB min
Gain Control Range: 10dB min
1dB Step
ACPR
CDMA 10FA: 45dBc @ 885KHz
50dBc @ 1.98MHz
Delay: 5usec max
Supply Voltage: 8 V
AC 110~220V to DC 8V SMPS Adaptor
Current Consumption:
3A max
DC 8V Current Consumption
ENVIRONMENTAL
Operating Temperature: -5°C ~ +45°C
Humidity 85%
INDICATORS/CONTROLS
USB Port: Gain, ALC Level Setting, Alarm
Sleep Mode: Up Link non signal (below-65dBm): Off
Input over -65dBm: On (in 1 sec)
Oscillation Check: Observation Down Link
LED: Shut Down +16dBm
Sleep Mode: (U/L, D/L)
Shutdown: (U/L, D/L)
Oscillation: (D/L)
Power
ALC On/Off: Setting from GUI
RF Connector: N Type (Donor ANT): Service ANT: SMA