User's Manual

ADCP-75-237 • Issue 1 • 8/2007 • Section 3: Graphical User Interface
Page 3-7
© 2007, ADC Telecommunications, Inc.
- Equipment:
• AGC ON/OFF: Select to apply this option to the system and press “Send” to apply the
selection.
• Sleep ON/OFF: Select to apply this option to the system and press “Send” to apply the
selection.
• SD (shut down) ON/OFF: Select to apply this option to the system and press “Send” to
apply the selection.
850MHz Band Selection:
• A”+A/A/x: 12.5MHz path band A”+A, A, or no selection (x)
• B/B’/x: 12.5MHz path band B, B’, or no selection (x)
• Select to apply these options to the system and press “Apply” to apply the selections. See
below for factory set frequencies per band.
BAND TX RX
Select start Freq. Lo Freq. stop Freq. start Freq. Lo Freq. stop Freq.
A”+A 869
951.5
880 824
951.5
835
B 880 890 835 845
A’ 890 891.5 845 846.5
B’ 891.5 894 846.5 849
1900MHz Band Selection:
• A/B/C/x: 15MHz path band A,B,C, or no selection (x)
• D/E/F/x: 5MHz path band D,E,F, or no selection (x)
• Select to apply these options to the system and press “Apply” to apply the selections. See
below for factory set frequencies per band.
BAND
TX RX
start Freq. stop Freq. start Freq. stop Freq.
A 1930.625 1937.5 1944.375 1850.625 1857.5 1864.375
D 1945.625 1947.5 1949.375 1865.625 1867.5 1869.375
B 1950.625 1957.5 1964.375 1870.625 1877.5 1884.375
E 1965.625 1967.5 1969.375 1885.625 1887.5 1889.375
F 1970.625 1972.5 1974.375 1890.625 1892.5 1894.375
C 1975.625 1982.5 1989.375 1895.625 1902.5 1909.375
- System Reset: Press this to re-set the system.
- CommStatus: Blinking -> communicating
Gray -> Shut communication