User's Manual

ADCP-75-237 • Issue 1 • 8/2007 • Section 1: OVERVIEW
Page 1-4
© 2007, ADC Telecommunications, Inc.
2.6.1 850MHZ Repeater Band Selection
Band Selection is available within the US CELLULAR 25MHz bandwidth. User can select
either A band set (A”+A +A’) or B band set (B + B’) for 12.5MHz Bandwidth each, totaling
25MHz, or request the manufacturer to set the bandwidth before shipping the product from the
factory. Band selection is shown in
Table 1-2.
Table 1-2.Band Selection Table (850MHz)
FREQUENCY (MHZ)
BAND DOWNLINK UPLINK
A”+A 869 880 824 835
B 880 890 835 845
A’ 890 891.5 845 846.5
B’ 891.5 894 846.5 849
2.6.2 1900MHZ Repeater Band Selection
Band selection is available within the US PCS 60MHz bandwidth. You can select any A, B, or C
band(15MHz each, group1) and any D, E, or F band (5MHz each, group1) for a total 20MHz
Bandwidth each, or request the manufacturer to set bandwidth before shipping product from the
factory. Example; select A + E, or C + D, or A + F or any combination, but not two bands within
the same group. You can also choose to use only one band among the six bands available. Band
selection is shown in
Table 1-3.
Table 1-3.Band Selection Table (1900MHz)
FREQUENCY (MHZ)
BAND DOWNLINK UPLINK
A 1930 1945 1850 1865
D 1940 1950 1865 1870
B 1950 1965 1870 1885
E 1965 1970 1885 1890
F 1970 1975 1890 1895
C 1975 1990 1895 1910