User's Manual
Table Of Contents
- Install the RF Module(s)
- Safety Precautions
- Guard against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Check the DC Power Switch for the Module Bay
- Dual-Bay Modules Only—Remove the Module Bay Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables to the PRU Chassis
- Power on the RF Module(s) and the Prism Remote Unit
- Close the Remote Unit Door and Solar Shield
- Provision the Prism Remote Unit
- FlexWave Notch Filter (FWP-SPRINTFILTER)
- Fan Module Maintenance
- Specifications
- Standards Certification
- DCCS Global Technical Support
- DCCS Technical Training
- Accessing FlexWave User Documentation
Standards Certification
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 123
STANDARDS CERTIFICATION
FCC
ThisequipmentcomplieswiththeapplicablesectionsofTitle47CFRPart15(HostUnit),Part22(800MHzCellular),Part24(1900MHz
-PCS),Part90(800/900-SMR),andPart27(2100MHz-AWS)&(700MHz-LTE).
WARNING.ThisisNOTaCONSUMERdevice.ItisdesignatedforinstallationbyFCCLICENSEESandQUALIFIEDINSTALLERS.YouMUST
haveanFCCLICENSEorexpressConsentofanFCCLicenseetooperatethisdevice.UnauthorizedusemayresultinSignificantforfeiture
penalties,includingpenaltiesinexcessof$100,000foreachcontinuingviolation.
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttopart15oftheFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercial
environment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith
theinstructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialareais
likelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
IC
ThisequipmentcomplieswiththeapplicablesectionsofRSS-131.Theterm“IC:”beforetheradiocertificationnumberonlysignifiesthat
IndustryCanadaTechnicalSpecificationsweremet.
TheManufacturer'sratedoutputpowerofthisequipmentisforsinglecarrieroperation.Forsituationswhenmultiplecarriersignalsare
present,theratingwouldhavetobereducedby3.5dB,especiallywheretheoutputsignalisre-radiatedandcancauseinterferenceto
adjacentbandusers.Thispowerreductionistobebymeansofinputpowerorgainreductionandnotbyanattenuatorattheoutputof
thedevice.
NOTE:TocomplywithMaximumPermissibleExposure(MPE)requirements,themaximumcompositeoutputfromtheantennacannot
exceed1000WattsERP(LTE,Cellular,andPCS),theantennacannotexceed1640WattsEIRP(PCSandAWS),andtheantennamustbe
permanentlyinstalledinafixedlocationthatprovidesatleast6meters(20feet)ofseparationfromallpersons.
UL/CUL
Thiswillbeinstalledinarestrictedaccesslocation.ThisequipmentcomplieswithType4,perULandCUL50,StandardforEnclosuresfor
ElectricalEquipment.ThisequipmentprovidesthedegreeofprotectionspecifiedbyIPX6asdefinedinIECPublication529.
FDA/CDRH
ThisequipmentusesaClass1LASERaccordingtoFDA/CDRHRules.Thisproductconformstoallapplicablestandardsof21CFRPart
1040.
CAUTION:Modificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatethe
equipment.
EU Harmonized Standards
MeetsessentialrequirementsofR&TTE1999/5/EC.
• Article3.1a—Theprotectionofthehealthandthesafetyoftheuserandanyotherperson,includingtheobjectiveswithrespectto
safetyrequirementscontainedinDirective2006/95/EC,butwithnovoltagelimitapplying.
• Article3.1b—TheprotectionrequirementswithrespecttoelectromagneticcompatibilitycontainedinDirective2004/108/EC.
• Article3.2—Inaddition,radioequipmentshallbesoconstructedthatiteffectivelyusesthespectrumallocatedtoterrestrial/space
radiocommunicationandorbitalresourcessoastoavoidharmfulinterference.
EMC Standards
EN55022andEN55024(CEmarked)
Safety Standards
ThisequipmentcomplieswithIEC60950-1,2NDEdition+Amendment1(CEmarked)andwithUL60950-1,2NDEdition+Amendment
1(FilenumberE174166)(USAandCanada)
Burn-In Testing
CommScopeiscommittedtodeliveringthehighestqualityproducts.Ongoingreliabilitytestingofproductspriortosaleisoneelementof
ourqualitymanagementsystem.Thisincludesrandomsamplesystemburn-inonPrismHDMRFModulesandRemoteUnitenclosures,to
ensurewedeliverthemostreliablesolutionpossible.