User's Manual
Table Of Contents
- Install the RF Module(s)
- Safety Precautions
- Guard against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Check the DC Power Switch for the Module Bay
- Dual-Bay Modules Only—Remove the Module Bay Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables to the PRU Chassis
- Power on the RF Module(s) and the Prism Remote Unit
- Close the Remote Unit Door and Solar Shield
- Provision the Prism Remote Unit
- FlexWave Notch Filter (FWP-SPRINTFILTER)
- Fan Module Maintenance
- Specifications
- Standards Certification
- DCCS Global Technical Support
- DCCS Technical Training
- Accessing FlexWave User Documentation
FlexWave Notch Filter (FWP-SPRINTFILTER)
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 115
Figure35providesthedimensionsrequiredtocreateamountingtemplate.(Forfulltechnicalspecifications,see
Table26onpage122.)
Figure 35. Notch Filter Mounting Dimensions
16.0 ±.1
.70
.70
2.805
.95 .95
1.00
2 Locaons
5/16-18
Ground Lug
Front View
Side View
Back View
4.55
17.9 ±.1
4.10
Mounng
Bracket
15.93
8.51
Mounng Bracket