User's Manual

Table Of Contents

Document Overview

FWPP-504-02 FlexWave

Prism Remote Unit and RF Module Installation Guide

Document Revision History

DOCUMENT CAUTIONS AND NOTES

Twotypesofmessages,identifiedbelow,appearinthetext:

CAUTION! Cautions indicate operations or steps that could cause personal injury, induce a safety problem in a

managed device, destroy or corrupt information, or interrupt or stop services.

NOTE: Notes contain information about special circumstances.

Table 7. Supported Single SuperDARTs, Diversity, Single Bay RF Modules

Catalog Number Description

FWP-6226000MOD 10W 900 EGSM

FWP-K226000MOD 10W 900 P-GSM

FWP-7426000MOD 20W 1800 GSM

FWP-9426000MOD 20W 2100 UMTS

FWP-A426000MOD 20W 2100 AWS

FWP-8426000MOD 20W 1900 PCS

Table 8. Supported Dual Classic DART, Two Bay RF Modules

Catalog Number Description

FWP-D210000MOD 6.5W 800/900 ESMR, Non-Diversity

Issue Document Date Technical Updates

FWPP-504-02 May 2017 Adds support for RF Module FWP-Z4MT000MOD (20W 2100 AWS-3 MIMO); see Table 2 on page 1.

FWPP-504-01 July 2016 The initial release of this installation guide (FWPP-504-01) was released when CommScope acquired TE

Connectivity’s telecom, enterprise and wireless business, which included the FlexWave Prism product line.

CommScope document FWPP-504-01 replaced TE document TECP-77-275. FWPP-504-01 also added support

for the HDM TDD RF Modules FWP-T4MT000MOD-L (20W 2500 TDD Low, MIMO, 2496.5-2571.5 MHz) and

FWP-T4ST000MOD-H (20W 2500 TDD High, SISO, 2615-2690 MHz), changed RF Module installation

instructions as PRUs no longer ship with any RF Modules factory installed, and added cautions to ensure that

the AC/DC Power switch to the Remote Unit chassis and the DC power switch to all RF Module bays are in their

OFF position before connecting or disconnecting coaxial cables.