User's Manual
Table Of Contents
Configuring the System with RF
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 27
RF Module Cables and Supported Bay Installations for Legacy Dual-Bay
40W RF Modules
ThecablesandconnectorshavecorrespondinglabelsasshowninTable17onpage28forLegacyDual-Bay40W
RFModules.Table17onpage28alsoshowswhichRFModuletypecanbeinstalledinwhichPRUbay(s)whena
40WDual-BayRFModuleispartoftheRFModulemixinaPRUchassis.TheSingle-Baychassisisnotincludedin
Table17onpage28.
ForDual-Bayinstallations,theRFcablesandconnectorsarelabeledasMOD N TX0/RX0andMOD N TX1/RX1,
whereNreferstothetopbayofthedouble-bayinstallation.Forexample:
• ForaDual-BayinstallationinaQuad-BaychassisinwhichtheRFModuleisinstalledintheBayDandBayC
combination,theRFcablesandconnectorsarelabeledasMOD D TX0/RX0andMOD D TX1/RX1.
• ForaDual-BayinstallationinaTri-BaychassisinwhichtheRFModuleisinstalledintheBayCandBayB
combination,theRFcablesandconnectorsarelabeledasMOD C TX0/RX0andMOD C TX1/RX1.
Table 16. Supported Bay Use and RF Antenna Labels for Single-Card, Dual-Card, and HDM RF Modules
(From Top of Remote Unit Chassis Down)
Supported Bay
Configurations
for Single-Bay RF
Modules
Supported Bay Combinations
for Dual-Bay RF Modules
RF Module Cable,
RF Module
Connector, and
Remote Antenna
Connector Label
Function
Supported
Bays in
Dual-Bay
Chassis
Supported
Bays in
Tri-Bay
Chassis
Supported
Bays in
Quad-Bay
Chassis
Bay D MOD D N/A N/A
MOD D
Mod D TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module D
Mod D TX1/RX1 Transmit RF power and secondary/Path 2 receive
to/from the antenna for RF Module D
Bay C MOD C N/A MOD C
Mod C TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module C
Mod C TX1/RX1 Diversity receive/Path 2 for Transmit RF power and
secondary/Path 2 receive to/from the antenna for
RF Module C
Bay B MOD B
MOD B MOD B MOD B
Mod B TX0/RX0 Transmit RF power and primary/Path 1receive
to/from the antenna for RF Module B
Mod B TX1/RX1 Transmit RF power and secondary/Path 2 receive
to/from the antenna for RF Module B
Bay A MOD A
Mod A TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module A
Mod A TX1/RX1 Transmit RF power and secondary/Path 2 receive
to/from the antenna for RF Module A