User's Manual

FlexWave
®
Prism Remote Unit and RF Module Installation Guide FWPP-504-02
Page 16 © May 2017 CommScope, Inc.
Overview of RF Modules for Prism Remote Units
HDM RF Modules
High-DensityModule(HDM)RFModules(Figure3)aredesignedtoprovidetheabilitytodeployeitheratwo
20WMultipleInputMultipleOutput(MIMO)pathsofthesameband,knownasaMIMORFModule;two20W
SingleInputSingleOutput(SISO)withtwodifferentbands,knownasdualRFModule;orasingle40WSingle
InputSingleOutput(SISO)RFModulewithinasingle-bayofaPRU.
Figure 3. HDM RF Modules
AnHDMRFModuledoesthefollowing:
interfaceswithoneHostDART-eitherClassicorSuperDART,oroneCDIU
supportstwonon-contiguousRFslicesupto35MHztotalbandwidthinaDualorMIMOconfiguration
supportsfullbandwidthinaSISOconfiguration,upto75MHz
supports20Wperband/PathinaDual/MIMORFModule
supportsupto40WRFoutputpowerinaSISORFModule.
ThecomponentsofaPRUHDMRFModulearedependentonthemoduletype,aslistedinTable12.
Table 12. Components of PRU HDM RF Modules
RF Module Type DPM LPA Duplexer LNA Power Detector Rx Card Tx Card
SISO 1 1 1 1 1 1 1
MIMO/Dual Band Module 1 2 2 2 2 2 2