User's Manual

Overview of Prism Remote Units
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 7
PORTS AND CONNECTORS
MakesureyourefertothesectionthatdescribesthePRUdeployedinyourinstallation."Bottomofan
AC-PoweredQuad-BayPRU”onpage8and"DC-PoweredQuad-BayPRU”onpage9showsthedifferences
betweenanAC-poweredandaDC-poweredPRU.ThedifferenceswillbethesameforSingle-Bay,Dual-Bay,and
Tri-Baychassis.Additionally,forboththeAC-PoweredandDC-PoweredPRUs:
• ThenumberofAntennaconnectorsonthebottomofaPRUcorrespondstothenumberofRFModulebaysin
thatPRUmodel,wheretherearetwoAntennaconnectorsperbay.Forexample:
– TherearefourRFModulebaysinaQuad-BayPRU,sothereareeightAntennaconnectors.
– ThereisoneRFModulebayintheSingle-BayPRU,sotherearetwoAntennaconnectors.
• TheSingle-BayPRUonlyhasoneFiberconnectorwhereastheotherthreePRUmodelshavetwo.