User's Manual
Table Of Contents
- Install the Prism Remote Unit
- Planning for a Prism Remote Unit Installation
- Unpack and Inspect the Prism Remote Unit and Components
- Mount the Prism Remote Unit
- Ground the PRU Chassis
- Connect a Network Cable to the PRU Chassis
- Connect Fiber Cable to the PRU Chassis
- Connect the Antenna Cable
- Determine the Circuit Breaker or Fuse for the PRU
- Connect the Power Wiring
- (Optional) Connect the Prism Remote Unit to a UPS
FlexWave
®
Prism Remote Unit and RF Module Installation Guide FWPP-504-02
Page 68 © May 2017 CommScope, Inc.
Install the Prism Remote Unit
UsethefollowingproceduretoinstallthefibercablesusingtheProAxconnector:
1 Remov
eProAxconnectordustcoverlocatedatthebottomofthePRU.
CAUTION! To avoid the risk of equipment damage, ensure that the AC/DC Power switch to the
Remote Unit chassis and the DC power switch to all RF Module bays are in their OFF
position before connecting or disconnecting coaxial cables; otherwise equipment damage
may occur.
Fiber 1
Fiber 2
Boom of Quad-Bay PRU with ProAx Connectors