User's Manual

FlexWave
®
Prism Remote Unit and RF Module Installation Guide FWPP-504-02
Page 64 © May 2017 CommScope, Inc.
Install the Prism Remote Unit
4 InserttheFiberOpticcable,terminatedwithLCconnectors,throughtheFiber1Connector.
5 CleanallLCconn
ectorsfollowingindustryapprovedprocedure.
6 Refe
rtooneofthefollowinggraphicstoconnecttheLCconnectorstotheSFP:
• fo
rstandardconfigurations,seeFigure15onpage65
• for
WDMPass-Throughconfigurations,seeFigure16onpage65.
Fiber 1 and Fiber 2 are
Fiber Pass-Through
Connectors
AC or DC PRU
(The Fiber 1 and Fiber 2 connectors are in the same
locaon for both the AC- and DC-powered PRUs.)
FIBER 1FIBER 2