User's Manual

Install the Prism Remote Unit
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 49
Masonry Wall Mounting
1 Referto"MountingCautions”onpage42beforebeginningthisprocess.
2 LocatetheMountingBracketprovidedwiththePRUMountingKit.
3 O
btainthetoolsandsupplieslistedin"ToolsRequiredforAllMountingMethods”onpage36and"Additional
ToolsandSuppliesRequiredforF
lat-SurfaceMounting”onpage37.
4 Veri
fythatconcreteanchorstobeusedaredesignedfor1/2-inchbolts.
5 Holdthe
MountingBracketinpositiononthewall.
6 Usingap
encil,markthelocationofeachoftheMountingBracket’stwomountingholesonthewall.When
mountingthePRUonamasonrysurface,locatethemountinganchorsascloseaspossibletothecenterofany
bricksorblocks,especiallytheupperanchors.
Masonry Wall
Prism Remote Unit
Mounng Bracket
Mark the locaon of the
two mounng holes