User's Manual

Install the Prism Remote Unit
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 41
d HoistthePRUtoanupright
positionandtapthecrate
do
wnwardstoseparatethe
PRUfromtheMounting
Bracket.
e Remov
etheMounting
Bracketfromthecrate:
i Uns
crewtwoboltsand
removetheMounting
Bracketfromthecrate.
ii SavetheMounting
Bracketforfield
installation.
iii Savethetwoboltsand
emptyshippingcratefor
useshouldthe
equipmentrequire
shipment.
CAUTION! The crate used to ship the
Fullband Remote Unit
and the two bolts used to
fasten the Mounting
Bracket to the shipping
crate are not intended for
use for when mounting
the PRU in the field.
Hoist should be connected
to the two D-Rings on the
top of the PRU chassis
Tap the crate down as you
hoist the PRU chassis up
Mounng bracket will sll
be aached to the crate