User's Manual

Install the Prism Remote Unit
FWPP-504-02 FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc. Page 39
UNPACK AND INSPECT THE PRISM REMOTE UNIT AND COMPONENTS
1 Inspecttheexterioroftheshippingcontainer(s)forevidenceofroughhandlingthatmayhavedamagedthe
componentsinthecontainer.
2 Checkthe
contentsfordamageandverifywiththepackingslip.
Ifdamageisfoundorpartsaremissing,fileaclaimwiththec
ommercialcarrierandnotifyCommScope
CustomerService(see"DCCSGlobalTechnicalSupport”onpage124).Savethedamagedcartonsfor
inspectionbythecarrier.
3 Un
packthePRU.
a Remov
ethepowercableandanyothership-a-longitemsfromeithersideofthePRU.
b Connectah
oisttothetwoDringsatthetopofthePRU.
Top of a
Dual-Bay PRU
D-Rings on
the PRU