User's Manual
Table Of Contents
- Preface
- Overview of RF Modules for Prism Remote Units
- Install the RF Module(s)
- Safety Precautions
- Guard Against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Dual-Slot Modules Only—Remove the Module Slot Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables
- Power on the RF Module
- Contacting TE Connectivity
Secure RF Module Latches
FlexWave Prism RF Modules for Prism Remote Units Installation Guide Page 35
TECP-77-141 • Issue 1 • April 2012 © 2012 TE Connectivity Ltd.
LatchesonDual‐Slot40WRFModules
ForDual‐Slot40WRFModules,securefourlatches,asshowninFigure20.
Four latches
in a Dual-Slot
40W RF Module
Figure20.Dual-Slot 40W RF Module Latches
VerifythattheRFMo
duleMountingHookisEngaged
10 VerifythattheRFModuleMountingHookisengagedcorrectlybypullingthemoduleaway
fromtheheatsink.TheRFModuleshouldnotmove.IftheRFModulemovesduringthischeck,
repeatStep6onpage24throughStep9.