User's Manual
Table Of Contents
- Preface
- Overview of RF Modules for Prism Remote Units
- Install the RF Module(s)
- Safety Precautions
- Guard Against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Dual-Slot Modules Only—Remove the Module Slot Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables
- Power on the RF Module
- Contacting TE Connectivity
Push the RF Module back
into the chassis until it can
go no further.
Install the RF Module(s)
Page 32 FlexWave Prism RF Modules for Prism Remote Units Installation Guide
© 2012 TE Connectivity Ltd TECP-77-141 • Issue 1 • April 2012
Figure17.Seating a Dual-Slot RF Module
SecureRFModuleLatches
9 TosecurethemodulelatchesontheleftsideoftheRFModule,dooneofthefollowing,as
appropriatefortheRFModulebeinginstalled:
• “ConnectLatchesonSingle‐SlotandHDMRFModules”onpage33
• “ConnectLatchesonDual‐BandDual‐SlotRFModules”onpage34.