User's Manual
Table Of Contents
- Preface
- Overview of RF Modules for Prism Remote Units
- Install the RF Module(s)
- Safety Precautions
- Guard Against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Dual-Slot Modules Only—Remove the Module Slot Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables
- Power on the RF Module
- Contacting TE Connectivity
Table6. RFAntennaLabelsforSingle‐Card,Dual‐Card,andHDMRFModules—FromTopofChassisDown
RF Module
Cable,
RF Module
Connector,
and Remote
Antenna
Connector
Label
Function
Single-Slot
R
emote Unit RF
Module Slot
Designations
Dual-Slot Remote Unit RF Module Slot
Designations
Dual-Band Tri-Band Quad-Band
Mod D
TX0/RX0
Transmit RF power and primary receive
to/from the
antenna for RF Module D
MOD D N/A N/A MOD C
Mod D
TX1/RX1
Diversity receive for RF power from the
antenna for
RF Module D
Mod C
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module C
MOD C N/A MOD B
Mod C
TX1/RX1
Diversity receive for RF power from the
antenna for RF Module C
Mod B
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module B
MOD B MOD A MOD B
Mod B
TX1/RX1
Diversity receive for RF power from the
antenna for RF Module B
Mod A
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module A
MOD A MOD A MOD A
Mod A
TX1/RX1
Diversity receive for RF power from the
antenna for
RF Module A
RF Module Components
FlexWave Prism RF Modules for Prism Remote Units Installation Guide Page 11
TECP-77-141 • Issue 1 • April 2012 © 2012 TE Connectivity Ltd.