User's Manual
Table Of Contents
- Preface
- Overview of RF Modules for Prism Remote Units
- Install the RF Module(s)
- Safety Precautions
- Guard Against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Dual-Slot Modules Only—Remove the Module Slot Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables
- Power on the RF Module
- Contacting TE Connectivity
Overview of RF Modules for Prism Remote Units
Page 8 FlexWave Prism RF Modules for Prism Remote Units Installation Guide
© 2012 TE Connectivity Ltd TECP-77-141 • Issue 1 • April 2012
RFModuleComponents
Figure2showstypicalRFModulecomponents,usingtheSingle‐SlotRFModuleasanexample.
Mounting
latch
Mounting hook
Duplexer
Power Amplifier (PA)
DARTs
Figure2.PRU Single-Slot RF Module Components
Figure3showsthecomponentsofanHDMRFModule.
Duplexers
Power Amplifier
Mounting latch
Mounting hook
Tx and Rx Cards
Figure3.HDM RF Module Components