User's Manual

Page14 FlexWavePrismRemoteUnitRFModuleInstallationGuide
©2014 TEConnectivityLtd. TECP‐77‐141Issue6 • 300001744178RevF • April2014
RFModuleCablesforDual‐BayInstallations
ForDual‐Bayinstallations,theRFcablesandconnectorsarelabeledasMODNTX0/RX0andMODNTX1/RX1,
whereNreferstothetopbayofthedouble‐bayinstallation.Forexample,foraDual‐Bayinstallationina
Quad‐Baychassis,theRFcablesandconnectorsarelabeledasMODCTX0/RX0andMODCTX1/RX1.
ThecablesandconnectorshavecorrespondinglabelsasshowninTable10onpage14forLegacyDual‐Bay40W
RFModules.
Table10.
RFAntennaLabelsforLegacyDual‐Bay40WRFModules(FromTopofPRUChassisDown)
RFModule
Cable,
RFModule
Connector,and
RemoteAntenna
ConnectorLabel
Function 40WDu
al‐BayRemoteUnitRFModuleBayDesignations
 Dual‐Bay Tri‐Bay Tri‐Bay Quad‐Bay
BayD ModDTX0/RX0 TransmitRFpowe
rand
primary/Path1receiveto/from
theantennaforRFModuleD
N/A N/A N/A
MODC
MODD
MODC
ModDTX1/RX1 Diversityreceive/P
ath2forRF
powerfromtheantennaforRF
ModuleD
BayC ModCTX
0/RX0 TransmitRFpowerand
primary/Path1receiveto/from
theantennaforRFModuleC
N/A MODC
MODC
MODC
ModCTX
1/RX1 Diversityreceive/Path2forRF
powerfromtheantennaforRF
ModuleC
BayB ModBTX0/RX0 TransmitRFpowe
rand
primary/Path1receiveto/from
theantennaforRFModuleB
MODB MODB MODB MODB
MODB
ModBTX1/RX1 Diversityreceive/P
ath2forRF
powerfromtheantennaforRF
ModuleB
BayA ModATX
0/RX0 TransmitRFpowerand
primary/Path1receiveto/from
theantennaforRFModuleA
MODA MODA
ModATX
1/RX1 Diversityreceive/Path2forRF
powerfromtheantennaforRF
ModuleA
Note:For Dual Module installations the center module shelf needs to be removed; see “Dual-Bay Modules Only—Remove the Module
Bay Shelf” on page 21.
Note:Install the Legacy Dual-Bay 40W
RF Module in the lower-most bay in the chassis. If, however, if two Legacy Dual-Bay 40W RF
Modules are present, install the 2100 Module in the lower-most Bay and the 1900 Module in the upper-most Bay.