User's Manual

FlexWave Prism Remote Unit RF Module Installation Guide Page 19
TECP-77-141 Issue 8 • 300001744178 Rev H • September 2015 ©2015 TE Connectivity
Table 10.
Supported Bay Use and RF Antenna Labels for Single-Card, Dual-Card, and HDM RF Modules
(From Top of Remote Unit Chassis Down)
Supported Bay
Configurations
for Single-Bay
RF Modules
Supported Bay Combinations
for Dual-Bay RF Modules
RF Module
Cable, RF
Module
Connector, and
Remote Antenna
Connector Label
Function
Supported
Bays in
Dual-Bay
Chassis
Supported
Bays in
Tri-Bay
Chassis
Supported
Bays in
Quad-Bay
Chassis
Bay D
MOD D N/A N/A
MOD D
Mod D TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module D
Mod D TX1/RX1 Transmit RF power and secondary/Path 2
receive to/from the antenna for RF Module D
Bay C
MOD C N/A MOD C
Mod C TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module C
Mod C TX1/RX1 Diversity receive/Path 2 for Transmit RF power
and secondary/Path 2 receive to/from the
antenna for RF Module C
Bay B
MOD B
MOD B MOD B MOD B
Mod B TX0/RX0 Transmit RF power and primary/Path 1receive
to/from the antenna for RF Module B
Mod B TX1/RX1 Transmit RF power and secondary/Path 2
receive to/from the antenna for RF Module B
Bay A
MOD A
Mod A TX0/RX0 Transmit RF power and primary/Path 1 receive
to/from the antenna for RF Module A
Mod A TX1/RX1 Transmit RF power and secondary/Path 2
receive to/from the antenna for RF Module A