User's Manual
Table Of Contents
- Document Overview
- Overview of Prism Remote Units
- Overview of RF Modules for Prism Remote Units
- Configuring the System with RF
- Install the Prism Remote Unit
- Planning for a Prism Remote Unit Installation
- Unpack and Inspect the Prism Remote Unit and Components
- Mount the Prism Remote Unit
- Ground the PRU Chassis
- Connect a Network Cable to the PRU Chassis
- Connect Fiber Cable to the PRU Chassis
- Connect the Antenna Cable
- Connect the Power Wiring
- Determine the Circuit Breaker or Fuse for the PRU
- (Optional) Connect the Prism Remote Unit to a UPS
- Install the RF Module(s)
- Safety Precautions
- Guard against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Check the DC Power Switch for the Module Bay
- Dual-Bay Modules Only—Remove the Module Bay Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables to the PRU Chassis
- Power on the RF Module(s) and the Prism Remote Unit
- Close the Remote Unit Door and Solar Shield
- Provision the Prism Remote Unit
- FlexWave Notch Filter (FWP-SPRINTFILTER)
- Fan Module Maintenance
- Specifications
- Standards Certification
- DCCS Global Technical Support
FlexWave Prism Remote Unit and HDM RF Module Installation Guide 320000117795 Rev A • FWPP-501-01 Issue 1
Page 120 © March 2016 CommScope, Inc.
DCCS Global Technical Support
TECHNICAL TRAINING
YoucanaccesstrainingontheonlineCommScopeDASandSmallCellInstitute,asdescribedbelow.
1 ClickonthefollowingURLlinktotheInfrastructureAcademy:
http://www.commscopetraining.com/courses/dassc/
(Alternatively,entertheprecedingURLintoyourwebbrowser,andthenpressENTERonyour
keyboard.)
2 Reviewthecourseslistedinseparatecoursepanels;forfurtherinformationonacourse,clickitsFull
detailsbutton.Instructor-ledcoursesareconductedinNorthAmericaandEurope.Beforechoosing
acourse,pleaseverifytheregion.
3 Toviewthecoursescheduleandregister,clickCourse Registrationatthetopofthecoursepage;this
opensthePartner Learning Center Loginpage.
• Ifyouhaveanaccount,enteryourUsernameandPassword,andthenclickLogin.(Clickonthe
ResetPasswordlinkifyoudonothaveyourlogininformation.)
• Ifyoudon'thaveanaccount,clickontheCreate New User AccountlinkundertheLoginbutton,
andfollowtheprompts.
Onceyouhaveloggedin,youwillseealistofavailableclassdates.
4 ClickthedateyoupreferandselecttheEnrollorRegisterNowbuttontoenroll.Followtheprompts
throughthepaymentprocess.
5 ClickeithertheAvailable TrainingorCalendartabtoviewothertrainingcourses.
ACCESSING FLEXWAVE PRISM USER DOCUMENTATION
YoucanaccesstheFlexWavePrismuserdocumentationontheCommScopeDCCSCustomerPortal,as
describedbelow.
1 ClickonthefollowingURLlink:
https://www.mycommscope.com
(Alternatively,entertheprecedingURLintoyourwebbrowser,andthenpressENTERonyour
keyboard.)
2 AccesstotheCustomerPortalrequiresauseraccountandpassword.OntheSign Inpage,dooneof
thefollowing:
• Ifyouhaveanaccount,enteryourEmail addressandPassword,andthenclickSign In.
• Ifyoudon’thaveanaccount,clickNew user registration,andfollowtheprompts.
3 ClickDCCS.
4 Selectyoursite,andthenclickFlexWave Prism.
5 Clickonthetitleofanydocumenttoopenit.