User's Manual

FlexWave Prism Remote Unit and HDM RF Module Installation Guide 320000117795 Rev A • FWPP-501-01 Issue 1
Page 56 © March 2016 CommScope, Inc.
Install the Prism Remote Unit
Table21identifieshowthefibersintheMulti-FiberOpticCablecorrelatetotheSeRFSFPs,whichcome
pre-wiredfromthefactory.
NOTE: Each SFP utilizes a single fiber optic pair. Each SFP can support up to 12 timeslots with up to
75 MHz of bandwidth. Each fiber connector on the FRU contains 4 fiber pairs, supporting the
use of 4 SFPs. If additional SFPs are necessary, use the second fiber connector (FIBER 2).
Table 21. Multi-Fiber Optic Cable Color Codes
Fiber Connector # Color SeRF SFP Connector Fiber Connector # Color SeRF SFP Connector
1Blue1 TX 2Blue5 TX
1Orange1 RX
2Orange5 RX
1 Green 2 TX
2 Green 6 TX
1Brown2 RX
2 Brown 6 RX
1Gray3 TX
2Gray7 TX
1White3 RX
2 White 7 RX
1Red4 TX
2Red8 TX
1Black4 RX
2 Black 8 RX