User's Manual

ManualsBrandsADC Telecommunications ManualsElectronicsPrism 20W 2.5GHz TDD SISO High HDM

Table Of Contents

Document Overview
- Document Cautions and Notes
- Abbreviations Used in this Guide
Overview of Prism Remote Units
- Prism Remote Unit Components
- Ports and Connectors
Overview of RF Modules for Prism Remote Units
Configuring the System with RF
- RF Group Assignments for PRU RF Module Bays
- Understanding RF Cable Rules
  - RF Module Cables and Supported Bay Use for Single-Card, Dual-Card, and HDM RF Modules
  - RF Module Cables and Supported Bay Installations for Legacy Dual-Bay 40W RF Modules
Install the Prism Remote Unit

FWPP-501-01 Issue 1 • 320000117795 Rev A FlexWave Prism Remote Unit and HDM RF Module Installation Guide

© March 2016 CommScope, Inc. Page 45

Install the Prism Remote Unit

8 Clinchbandstubinplacebyhammeringdownbuckleears,asshownbelow.

9 RepeatStep3onpage43throughStep8foreachremainingbandingslotoftheMountingBracket.

10 HangthePRUfromtheMountingBracketasshownin"InstallingaPRUontheMountingBracket”on

page51.