User's Manual

FWPP-501-01 Issue 1 • 320000117795 Rev A FlexWave Prism Remote Unit and HDM RF Module Installation Guide
© March 2016 CommScope, Inc. Page 41
Install the Prism Remote Unit
d HoistthePRUtoan
uprightpositionandtap
thecratedownwardsto
separatethePRUfromthe
MountingBracket.
e RemovetheMounting
Bracketfromthecrate:
i Unscrewtwoboltsand
removetheMounting
Bracketfromthecrate.
ii SavetheMounting
Bracketforfield
installation.
iii Savethetwoboltsand
emptyshippingcrate
foruseshouldthe
equipmentrequire
shipment.
CAUTION! The crate used to ship
the Fullband Remote
Unit and the two bolts
used to fasten the
Mounting Bracket to
the shipping crate are
not intended for use
for when mounting
the PRU in the field.
Hoist should be connected
to the two D-Rings on the
top of the PRU chassis
Tap the crate down as you
hoist the PRU chassis up
Mounng bracket will sll
be aached to the crate