User's Manual

FWPP-501-01 Issue 1 • 320000117795 Rev A FlexWave Prism Remote Unit and HDM RF Module Installation Guide
© March 2016 CommScope, Inc. Page 39
Install the Prism Remote Unit
UNPACK AND INSPECT THE PRISM REMOTE UNIT AND COMPONENTS
1 Inspecttheexterioroftheshippingcontainer(s)forevidenceofroughhandlingthatmayhave
damagedthecomponentsinthecontainer.
2 Checkthecontentsfordamageandverifywiththepackingslip.
Ifdamageisfoundorpartsaremissing,fileaclaimwiththecommercialcarrierandnotify
CommScopeCustomerService(see"DCCSGlobalTechnicalSupport”onpage119).Savethe
damagedcartonsforinspectionbythecarrier.
3 UnpackthePRU.
a Removethepowercableandanyothership-a-longitemsfromeithersideofthePRU.
b ConnectahoisttothetwoDringsatthetopofthePRU.
Top of a
Dual-Bay PRU
D-Rings on
the PRU