User's Manual

ManualsBrandsADC Telecommunications ManualsElectronicsPrism 20W 2.5GHz TDD SISO High HDM

Table Of Contents

Document Overview
- Document Cautions and Notes
- Abbreviations Used in this Guide
Overview of Prism Remote Units
- Prism Remote Unit Components
- Ports and Connectors
Overview of RF Modules for Prism Remote Units
Configuring the System with RF
- RF Group Assignments for PRU RF Module Bays
- Understanding RF Cable Rules
  - RF Module Cables and Supported Bay Use for Single-Card, Dual-Card, and HDM RF Modules
  - RF Module Cables and Supported Bay Installations for Legacy Dual-Bay 40W RF Modules
Install the Prism Remote Unit

FWPP-501-01 Issue 1 • 320000117795 Rev A FlexWave Prism Remote Unit and HDM RF Module Installation Guide

© March 2016 CommScope, Inc. Page 15

Overview of RF Modules for Prism Remote Units

Single- and Dual-Bay RF Modules with Classic or SuperDARTs

Figure2showsexamplesofSingle-andDual-BayRFModules,bothofwhichhavetwoDARTs.

Figure 2. Single- and Dual-Bay RF Modules

Single-BayRFModuleshavethefollowingelements:

• oneortwoDARTs

• oneDuplexerthatcomprises

– oneLowNoiseAmplifier(LNA)

– onePowerDetector(PD)

• oneLinearPowerAmplifier(LPA)

• oneRemoteDARTInterface(RDI)board.

Dual-BandDual-BayRFModuleshavethefollowingelements:

• twoDARTs

• twoDuplexers,eachofwhichcomprises

– oneLowNoiseAmplifier(LNA)

– onePowerDetector(PD)

• oneLinearPowerAmplifier(LPA)

• oneRemoteDARTInterface(RDI)board.

Dual-Band Dual-Bay RF ModuleSingle-Bay Dual-Card RF Module

NOTE: Some Single-Bay RF Modules

have only 1 DART Card.