User's Manual

FlexWave Prism Remote Unit and HDM RF Module Installation Guide 320000117795 Rev AFWPP-501-01 Issue 1
Page 12 © March 2016 CommScope, Inc.
Overview of RF Modules for Prism Remote Units
OVERVIEW OF RF MODULES FOR PRISM REMOTE UNITS
DependentonthePrismRemoteUnitmodel,aPRUenclosurecanhavefromonetofourRFModulebays
andcansupportuptofourRFModules,asindicatedbythemodelname.Thatis,theSingle-BayPRUhas
oneRFModulebayandcanonlysupportoneRFModule,andtheQuad-BayPRUhasfourRFModule
baysandcansupportuptofourRFModules.
ThefunctionoftheRemoteUnitRFModulesontheForwardPathisto:
convertthedigitizedRFtransportedfromtheHosttoAnalogRF
amplifytheAnalogRFsignal
providesignalfiltering.
ThefunctionoftheRemoteUnitRFModulesontheReversePathisto:
converttheAnalogRFfromthehandsettoDigitalRFfortransporttotheHost
amplifytheDigitalRFsignal
providesignalfiltering.
NOTE: The RF Modules are field replaceable, but cannot be serviced in the field.
RF MODULE DIGITAL/ANALOG RADIO TRANSCEIVERS
EachRFModulecansupportanyofthefollowingDigital/AnalogRadioTransceiver(DART)
combinations:
oneClassicDARToroneSingleSuperDART
twoClassicDARTs(i.e.,the6.5W800/900ESMRModule,Non-Diversity,Classic)
twoClassicDARTs—Diversity
twoSingleSuperDARTs—Diversity
oneDualSuperDART
oneortwosetsofTxandRxBoards(HDM).
EachRFModulewillhaveuptotwo6-timeslotDARTsorone12-timeslotDARTperRFModule.
TheDARTtypedeterminesthemaximumnumberoflinks,wheretherecanbeuptoeightClassicDARTs
orSingleSuperDARTsthatsupport39MHzeach,orupto4DualSuperDARTsthatsupportupto75MHz
each.