User's Manual

FWPP-501-01 Issue 1 • 320000117795 Rev A FlexWave Prism Remote Unit and HDM RF Module Installation Guide
© March 2016 CommScope, Inc. Page 7
Overview of Prism Remote Units
PORTS AND CONNECTORS
MakesureyourefertothesectionthatdescribesthePRUdeployedinyourinstallation."Bottomofan
AC-PoweredQuad-BayPRU”onpage8and"DC-PoweredQuad-BayPRU”onpage9showsthe
differencesbetweenanAC-poweredandaDC-poweredPRU.Thedifferenceswillbethesamefor
Single-Bay,Dual-Bay,andTri-Baychassis.Additionally,forboththeAC-PoweredandDC-Powered
PRUs:
• ThenumberofAntennaconnectorsonthebottomofaPRUcorrespondstothenumberofRFModule
baysinthatPRUmodel,wheretherearetwoAntennaconnectorsperbay.Forexample:
– TherearefourRFModulebaysinaQuad-BayPRU,sothereareeightAntennaconnectors.
– ThereisoneRFModulebayintheSingle-BayPRU,sotherearetwoAntennaconnectors.
• TheSingle-BayPRUonlyhasoneFiberconnectorwhereastheotherthreePRUmodelshavetwo.