User's Manual

Install the RF Module(s)
Page 42 FlexWave Prism RF Modules for Prism Remote Units Installation Guide
© 2012 TE Connectivity Ltd TECP-77-141 • Issue 1 • April 2012
PowerontheRFModule
15 FollowtheruleslistedbelowtotogglethePowerswitchthatcorrespondstotheRFModule
toitsONposition.
• ForDual‐SlotRFModules,usethePowerswitchforthelowermodule.Forexample,to
powerupaDual‐SlotRFModuleincombinedslotsC+DinaQuad‐Bandchassis,turnON
DCPowerswitchforModC;leavetheDCPowerswitchforModDOFF.
• ADual‐Slot40WRFModuleusesthePowerSuppliesinbothslots.IftheDual‐Slot40WRF
ModuleisinstalledinslotsC+D,turnONthePowerswitchforModCandModD.
MOD A
SeRF
Module
AC Power
switch for
Remote
chassis
DC Power switch for Mod A
DC Power switch for Mod B
DC Power switch for Mod C
DC Power switch for Mod D
MOD B
MOD C
MOD D
16 RepeatStep1throughStep15toinstallotherRFModules.