User's Manual
Table Of Contents
- Preface
- Overview of RF Modules for Prism Remote Units
- Install the RF Module(s)
- Safety Precautions
- Guard Against Damage from Electro-Static Discharge
- Unpack and Inspect the RF Module
- Remove Release Liners from the RF Module
- Dual-Slot Modules Only—Remove the Module Slot Shelf
- Install the RF Module into the Prism Remote Chassis
- Secure RF Module Latches
- Connect the RF Module Cables
- Power on the RF Module
- Contacting TE Connectivity
Dual-Slot Modules Only—Remove the Module Slot Shelf
FlexWave Prism RF Modules for Prism Remote Units Installation Guide Page 23
TECP-77-141 • Issue 1 • April 2012 © 2012 TE Connectivity Ltd.
Dual‐SlotModulesOnly—RemovetheModuleSlotShelf
4 ForDual‐SlotRFModulesonly.
Use 9/64” Allen Wrench to
remove the three module-shelf screws
Remove Module D Shelf for
Dual-Band Dual-Slot RF Modules
Remove Module B Shelf for
Dual-Slot 40W RF Modules
IfyouareinstallingaDual‐SlotRF
Module,youmustremoveamodule
s
lotshelffromthePRUchassisto
accommodatethemodule’ssize.
(Forfurtherinformation,Table6
onpage11.)
Removetheshelfasappropriatefor
theRF
Module:
• ForaDual‐Slot40WRFModule,
removetheModuleBShelf.
• ForaDual‐BandDual‐SlotRF
Module,removeModuleD
Shelf.
Toremovethemoduleshelf:
a Usea9/64”Allen
™
wrenchto
removethethreescrewsthat
attachthemoduleshelftothe
PRUchassis,asshowninthe
followinggraphic.
b Discardorstorethemodule
shelfandfasteners.