User's Manual

Viewing the Status of a Remote Unit
Page 156 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
VIEWING THE STATUS OF A REMOTE UNIT
For further information on the faults listed in the View Status page for Remote
Units, see
“Troubleshooting Alarms” on page 185.
1 In the System Tree, click on the icon of the PRU/URU for which you want to
view its status.
2 In the Unit Menu bar, click Unit Information > View Status.
The Unit Information > View Status page provides the following information for the
selected Remote Unit. The background of each table cell is color coded to the level
of the alarm; see
“Viewing Parameters and Alarms” on page 44. For more
information on the faults and alarms, see “Troubleshooting Alarms” on page 185.
Module Status Table
The Module Status table provides status information for PRU/URU modules where
columns 1 through 8 correspond to the slot in which a DART resides (see
“RF
Module Capabilities and GUI Representation” on page 21).
The following sections describe the different sections within the Module Status table.