User's Manual

Managing Units
FlexWave Prism Element Management System 7.1 User Manual Page 149
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
VIEW OPTICAL PORTS
The View Optical Ports page shows the current usage and alarm status of the optical
ports on a Host or a PRU/URU plus the current values of key operating parameters.
The Host and PRU/URU chassis have eight optical ports, but the View Optical Ports
page only shows active ports (those physically connected to a Host or PRU/URU).
Each port in the page represents one set of forward and reverse paths between a
Host and Remote.
1 In the System Tree, click on an icon for a Host or Remote Unit.
2 In the Unit Menu bar, click Unit Information > View Optical Ports.
The View Optical Ports table has the following components:
• SFP Number—System assigned port number.
• SFP Name—user entered port name or UNKNOWN_SFPNAME, which indicates that
no name has been entered.
• In/Out—used for cascading, which is not supported in this release. The Host will
therefore always be set as Out (indicates that the forward link for the connected
SFP is going away from the Host) and the SFPs for all Remote Units will always
be set as In.
• Optics Type
– LongRange—26 dB
– IntermediateRange—18 dB.