User's Manual

Setup SNMP
Page 144 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
SETUP SNMP
1 To access the Setup SNMP page, in the System Menu bar, click System Configuration
> Setup SNMP.
2 In the SNMP V1 Agent Override panel, do the following.
a In the Mode list, select the SNMP V1 Agent Override mode:
• Enabled
• Disabled
b In the Address box, enter the SNMP V1 Agent Override address. If the SNMP
Agent Override Mode is not Disabled, the system uses this address as the
source address in the traps.
3 In the SNMP Port Number box, enter the SNMP port number for sets and gets.
4 Click Apply to modify the SNMP settings.