User's Manual

System Management

FlexWave Prism Element Management System 7.1 User Manual Page 141

Modifying an SNMP Trap Manager

1 In the System Menu bar, click System Configuration > Set SNMP Trap Managers. The

Registered Trap Managers table lists existing SNMP Trap Managers.

2 In the Registered Trap Managers table, select the trap manager that you want to

modify.

3 In the Add New Trap Manager

panel, do any of the following:

• In the IP Address box enter a

new IP address. The

address must be in the

xxx.xxx.xxx.xxx format.

• In the Port box, enter the

port on the device that will

receive the traps. The

normal and recommended

SNMP trap port is 162.

• In the Community box, enter

a password that allows

access to the device

(usually public or private).

The Community password

is limited to 20 characters.

• In the Version list, select the trap version for the SNMP Trap Manager that

you are registering.

4 Click Modify.

The Registered Trap Managers table

updates with the modified

SNMP Trap Manager.