User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 287
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Alarmed Module
SNMP MIB:
fwuSystemAlarmModType
Description: Identifies the module type that raised the alarm.
Values: SeRF
DART
LPA
LNA
Power Detector
SFP
Syntax: Integer32
Access Level: Read Only
Alarm Enable Table
Alarm Code
SNMP MIB:
fwuSystemModuleAlarmcode
Description: An alphanumeric code that uniquely identifies an alarm/fault.
Values: See “Troubleshooting Alarms” on page 185 or use the “Index of
Alarms” on page 313 to find the page number for a specific alarm
description, which includes the alarm code.
Syntax: Unsigned32
Access Level: Read Only
Node Address
SNMP MIB:
fwuSystemTrapNodeAddress
Syntax: UnitId2
Access Level: Read Only
Alarmed Module Number
SNMP MIB:
fwuSystemAlarmModuleNo
Description: Identifies the specific module type that raised the alarm.
Values: SeRF
DART
LPA
LNA
Power Detector
SFP
Syntax: Unsigned32
Access Level: Read Only