User's Manual

Prism MIB Objects
Page 286 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Alarm Host Number
SNMP MIB:
SystemAlarmHstNbr
Description: Number identifying the host in the system
Syntax: Unsigned32
Access Level: Read Only
Analog Node Address
SNMP MIB:
fwuSystemAlarmAnalogAddress
Description: Analog Portion of the node address
Syntax: UnitID3
Access Level: Read Write
Alarm Management Table
Alarm Code
SNMP MIB:
fwuSystemAlarmCode
Description: An alphanumeric code that uniquely identifies an alarm/fault.
Values: See “Troubleshooting Alarms” on page 185 or use the “Index of
Alarms” on page 313 to find the page number for a specific alarm
description, which includes the alarm code.
Syntax: Unsigned32
Access Level: Read Only
Alarm Control
SNMP MIB:
fwuSystemAlarmManageable
Description: Indicates the ability to Enable or Disable alarm
Values: Enable = 1
Disable =0
Syntax: Updated
Access Level: Read Only
Alarm Threshold
SNMP MIB:
fwuSystemAlarmThreshold
Description: The threshold at which the alarm is raised (Whenever applicable)
Values: See “Troubleshooting Alarms” on page 185 or use the “Index of
Alarms” on page 313 to find the page number for a specific alarm
description, which includes the alarm threshold, if any.
Syntax: DisplayString
Access Level: Read Only