User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 285
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Module Number for Alarm
SNMP MIB:
fwuSystemAlarmModuleNumber
Description: Hardware module number, where the alarm has originated.
Values: Between 1 and 8
Syntax: Unsigned32
Access Level: Read Only
Module Name for Alarm
SNMP MIB:
fwuSystemAlarmModuleName
Description: Name of hardware module where trap originated.
Syntax: DisplayString
Access Level: Read Only
Alarm Severity
SNMP MIB:
fwuSystemAlarmSeverity
Description: Severity of the alarm
Syntax: AlarmType
Access Level: Read Only
Alarm Pass Band
SNMP MIB:
fwuSystemAlarmRFBand
Description: Describes the Band that may be affected due the raised alarm PCS,
GSM, AWS.
Syntax: DisplayString
Access Level: Read Only
Alarm Time
SNMP MIB:
fwuSystemAlarmTimeStamp
Description: Time at trap in raised.
Syntax: SystemDateand Time
Access Level: Read Only
Alarm Code
SNMP MIB:
fwuSystemAlarmCode
Description: An alphanumeric code that uniquely identifies an alarm/fault.
Values: Each alarm/fault has a unique alphanumeric code. See
“Troubleshooting Alarms” on page 185 or use the “Index of Alarms”
on page 313 to find the page number for a specific alarm description,
which includes the alarm code.
Syntax: Unsigned32
Access Level: Read Only