User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 279
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
DART Id
SNMP MIB:
fwuSchLinkTestDartId
Description: In which slot the DART resides.
Values: 1 - 8
Syntax: Integer
Access Level: Read-Write
SNMP Settings
V1 Trap Agent Address Override Mode
SNMP MIB:
fwuV1TrapAgentAddrOverrideMode
Description: V1 trap agent address override mode.
Values: 0 = Disable
1 = Enable
Default: 0
Syntax: INTEGER
Access Level: Read-Write
V1 Trap Agent Address Override IP Address
SNMP MIB:
fwuV1TrapAgentAddrOverrideIPAddr
Description: V1 trap agent address overriding address
Syntax: DisplayString
Access Level: Read-Write
SNMP Trap Resend Interval
SNMP MIB:
fwuSnmpTrapResendInterval
Description: Interval in minutes that must pass before the trap is resent
Values: 0 to 1440, where 0 = Disable
Syntax: Integer32
Access Level: Read-Write
Maximum for SNMP Trap Resend
SNMP MIB:
fwuSnmpTrapResendMaximum
Description: Maximum number of times trap will be resent with Disable = 0
Values: 0 to 360
Syntax: Integer32
Access Level: Read-Write