User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 269
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Minimum Average Input Power Level 1
SNMP MIB:
fwuRmtDARTMinAvgInputPwrLvl1
Description: Minimum Average Input Power Level1 to a Remote DART.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Minimum Average Input Power Level 2
SNMP MIB:
fwuRmtDARTMinAvgInputPwrLvl2
Description: Minimum Average Input Power Level2 to a Remote DART.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Power Level Mode
SNMP MIB:
fwuRmtDARTInputPowerMode
Description: Remote DART Input Power Level Mode.
Values: 0 = Snap Shot
1 = Max Hold
Default: 0
Syntax: Integer
Access Level: Read-Write
Power Level Max Hold Reset
SNMP MIB:
fwuRmtDARTPwrLevelMaxHoldReset
Description: Resets the Power Level Max Hold
Values: -1 = Not Applicable
0 = normal
1 = reset
Default: -1
Syntax: Integer
Access Level: Read-Write
Last Max Hold Reset Time
SNMP MIB:
fwuRmtDARTLastMaxHoldResetTime
Description: Date and Time of the last maxHold reset time of Remote.
Syntax: DisplayString
Access Level: Read Only