User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 261
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Mate Name
SNMP MIB:
fwuRmtSERFOptMateName
Description: Name of Remote mate.
Values: Inherits valid values from Remote name
Syntax: DisplayString
Access Level: Read Only
Mate Unit ID
SNMP MIB:
fwuRmtSERFOptMateId
Description: Numerical ID of companion Remote Unit.
Values: See “Unit Identification” on page 43
Syntax: NodeAddr1
Access Level: Read Only
Mate Unit SFP ID
SNMP MIB:
fwuRmtSERFOptMateSfpId
Description: Identifier of SFP to which the mate connects .
Values: 1 - 8
Syntax: Integer32
Access Level: Read Only
Mode
SNMP MIB:
fwuRmtSERFIPEnable
Description: Mode of IP enable RF carrier.
Values: 1= IPEnable 
2 = IP Disable
Default: 2
Syntax: Integer
Access Level: Read- Write
SFP Direction
SNMP MIB:
fwuRmtSERFOptMateSfpDir
Description: Indicates whether the fiber is incoming or outgoing on this SFP port.
Values: -1 = Unknown
0 = In
1 = Out
Syntax: Integer
Access Level: Read Only