User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 255
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Alarm Status Summary
SNMP MIB:
fwuRmtAlarmStatusSummary
Description: Summary of alarm status of the (connected) Remote Unit.
Syntax: AlarmType
Access Level: Read Only
Type
SNMP MIB:
fwuRmtType
Description: Type of Remote.
Syntax: unitType
Access Level: Read Only
Temperature Measurement
SNMP MIB:
fwuRmtTempMeasurement
Description: Temperature of each Remote Unit in celsius.
Syntax: Octal String
Access Level: Read Only
Prism Unit Reset
SNMP MIB:
fwuPrismUnitReset
Description: Boolean. Way to reset the Remote Unit remotely. Only applicable to
URH Remote Units (URUs).
Values: 0 = Normal
1 = Reset
Default: Default: 0
Syntax: Integer
Access Level: Read-Write
Catalog State
SNMP MIB:
fwuRmtCatalogState
Description: Catalog state of Remote Unit.
Values: This is used in the Recovery of the Remote Unit
Syntax: CatalogType
Access Level: Read Only
Table Row Status
SNMP MIB:
fwuRmtGeneralTableRowStatus
Description: The status of this conceptual row.
Syntax: RowStatus
Access Level: Read-Create