User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 251
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Peak Average Input Power Level 2
SNMP MIB:
fwuHstDARTPeakInputPwrLvl2
Description: Peak Average input Power level2. For Diversity systems, this will be
NA.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Min Average Input Power Level 1
SNMP MIB:
fwuHstDARTPeakAvgInputPwrLvl1
Description: Minimum Average Input Power Level1. For Diversity systems, this
will be NA.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Min Average Input Power Level 2
SNMP MIB:
fwuHstDARTPeakAvgInputPwrLvl2
Description: Minimum Average Input Power Level2. For Diversity systems, this
will be NA.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Peak Input Power Level 1
SNMP MIB:
fwuHstDARTMinAvgInputPwrLvl1
Description: Peak Input Power Level2. For Diversity systems, this will be NA.
Default: NA
Syntax: DisplayString
Access Level: Read Only
Peak Input Power Level 2
SNMP MIB:
fwuHstDARTMinAvgInputPwrLvl2
Description: Peak Input Power Level2. For Diversity systems, this will be NA.
Default: NA
Syntax: DisplayString
Access Level: Read Only