User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 247
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Tx-broadcast-packets
SNMP MIB:
fwuHstSERFEthPortTxBroadcastPkts
Description: Transmit broadcast packet counter
Syntax: Counter64
Access Level: Read Only
Host SeRF FPGA Parameters
Status
SNMP MIB:
fwuHstSERFFPGAStatus
Description: Gives the status if FPGA on SeRF Card
Values: 0 = PPC can talk to FPGA
1 = PPC cannot talk to FPGA
Default: 0
Syntax: Integer
Access Level: Read Only
Host List of Remotes Parameters
Monitor Index
SNMP MIB:
fwuHMmonIndex
Description: Index of the Host mate monitor table
Syntax: Integer32
Access Level: Read Only
Remote ID
SNMP MIB:
fwuHMmonRmtID
Description: ID (numerical) of companion Remote Unit
Values: See “Unit Identification” on page 43
Syntax: NodeAddr1
Access Level: Read Only
Remote IP Address
SNMP MIB:
fwuHMmonRmtIPAddress
Description: List of IP addresses of connected Remote Unit(s)
Syntax: IpAddress
Access Level: Read Only