User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 245
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Host SeRF ENET Switch Parameters
Ethernet Port Number
SNMP MIB:
fwuHstSERFEthPortNumber
Description: An identifier for each Ethernet port
Values: 1…12
Syntax: Unsigned32
Access Level: Read Only
Ethernet Port Type
SNMP MIB:
fwuHstSERFEthPortType
Description: An identifier for the type of Ethernet port
Syntax: EnetType
Access Level: Read Only
Host SFP ID
SNMP MIB:
fwuHstSERFEthPortSFPId
Description: Identifier of SFP to which the Ethernet port connects
Values: 1…8
Syntax: Integer32
Access Level: Read Only
Rx-bytes
SNMP MIB:
fwuHstSERFEthPortRxBytes
Description: Receive byte counter
Syntax: Counter64
Access Level: Read Only
Rx-packets
SNMP MIB:
fwuHstSERFEthPortRxPkts
Description: Receive packet counter
Syntax: Counter64
Access Level: Read Only
Rx-fsc-errors
SNMP MIB:
fwuHstSERFEthPortRxFcsErrors
Description: Receive FCS error counter
Syntax: Counter64
Access Level: Read Only