User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 239
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Host Unit Parameters
Host Parameters
Host Number
SNMP MIB:
fwuHstNumber
Description: Number enumerating a Host
Values: A number greater than 0
Default: 1
Syntax: Integer32
Access Level: Read Only
Host Name
SNMP MIB:
fwuHstName
Description: User defined name of the Host
Values: Alphanumeric Characters. Except as first character, the underscore
(_) character is allowed. Must be 5 to 40 characters in length, with
no spaces.
Default: Unknown_HostName
Syntax: Display String
Access Level: Read-Write
Host Unit Reset
SNMP MIB:
fwuHstUnitReset
Description: Resets the Host SeRF card when the value is changed from 0 to 1
Values: 0= normal
1 = reset
Default: 0
Syntax: Integer
Access Level: Read-Write
Host Back Plane Revision
SNMP MIB:
fwuHstBackPlaneRev
Description: Provides the back plane revision of the Host (Three pin Version
Number of the Chassis back plane)
Values: SIZE (1…40)
Syntax: Octal String
Access Level: Read Only