User's Manual

Prism MIB Objects
Page 238 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
DART Band Type for System Test User Commanded
SNMP MIB:
fwuUserCommLinkTestDartBandType
Description: Band type (the RF DART type) of selected units
Values: See “Band Types” on page 235.
Default: 0
Syntax: BandType
Access Level: Read-Write
DART ID for System Test User Commanded
SNMP MIB:
fwuUserCommLinkTestDartId
Description: Id of a particular DART
Values: 1 - 8
Syntax: Integer32
Access Level: Read-Write
System Alarm Status Summary
SNMP MIB:
fwuSystemAlarmStatusSummary
Description: Alarm Status Summary for entire system
Syntax: AlarmType
Access Level: Read Only
Clear System Configuration
SNMP MIB:
fwuClearSysConfig
Description: Changing the value from 0 to 1 clears the setting for the entire
settings on the system
Values: 0 = Disable
1= Enable
Default: 0
Syntax: Integer32
Access Level: Read-Write
Last Run Time of System/Link Test
SNMP MIB:
fwuLinkTestLastRunTime
Description: Time when the System/Link test was last run
Syntax: DateAndTime
Access Level: Read Only