User's Manual

Using an SNMP Interface
FlexWave Prism Element Management System 7.1 User Manual Page 233
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Accessing Prism MIBs
The Prism Agent MIB can be accessed using any SNMP manager with an active
network connection. The IP address of the Host must be known and entered in the
MIB browser.
1 On the manager computer, open the MIB Browser.
2 Load the MIB files in the following order:
a ADC-FWU-URH-TC-MIB.mib
b ADC-FWU-IRS-TC-MIB.mib
c ADC-FLEXWAVE-URH.mib
3 Enter the IP address of the Host of the Prism system in the text box provided
next to Host.
4 Enter the Port number as 161.
NOTE: If you are upgrading from a previous release, note the change in the SNMP Port number.
In previous releases, the SNMP Port number was 8001. It is now 161.
5 Enter the Read Community as public and Write Community as private.
6 Set Timeout to 15 seconds.
7 For SNMP version v2c and v3, set Maximum Repetitions to 10 or less.
8 To see an overview the MIB content, expand the MIB tree, as shown below.