User's Manual

Working with Prism MIB Files
Page 232 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
In a manager browser, a MIB looks like the EMS System Tree’s hierarchy of folders
and files, as shown in
Figure 29.
Figure 29. Prism MIB Tree
MIB items are arranged in a hierarchy of groups, like a hierarchy of folders. Known
OIDs specify scalars (objects). MIB objects are arranged in groups and tables. To
be specified completely, table entries require one or more row indices. Each set of
objects (within a single folder) represents one such group or table. An object
marked with a key symbol indicates that view is the key value for that table.
The Prism MIB is defined by three files:
• ADC-FWU-URH-TC-MIB.mib
• ADC-FWU-IRS-TC-MIB.mib
• ADC-FLEXWAVE-URH.mib
The MIB can be found on the SeRF II card in the Host in /usr/local/fwu/mibs.
“Prism MIB Objects” on page 236 lists objects that may be accessed for GET/SET
operations and traps/notifications that are sent to SNMP managers registered to
receive them whenever the respective fault condition occurs.
NOTE: TRAPS/NOTIFICATIONS are listed with the corresponding EMS alarm in
“Troubleshooting Alarms” on page 185.