User's Manual

Upgrading the System and Units
FlexWave Prism Element Management System 7.1 User Manual Page 219
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
CAUTION! At this point, the system goes offline for the approximate time listed in Table 25 on
page 216.
d Wait approximately four minutes, and then log back in to the EMS to
complete this procedure.
4 Complete Step 1 on page 216 to verify the status of the Host/Remote Unit(s)
updates.
COMMIT THE UPGRADE
NOTE: If you need to abort an update, go to“Abort an Update” on page 220.
1 Complete the steps in “Updating a Prism System” on page 216.
2 In the System Menu bar, click Upgrades > Commit.
3 In the Upgrades > Commit page, click Commit.
4 In the confirmation window, click OK.
The system informs you when the commit operation has completed.